Thanks to the tricks of the Finnish craftsmen, I was able to paint the pipes in a pack at once in a few minutes

Thanks to the tricks of the Finnish craftsmen, I was able to paint the pipes in a pack at once in a few minutes

Anyone who has painted pipes at least once knows how inconvenient it is, not only is it problematic to clean them, but also to paint around the circumference. If you paint one side, it will roll over with the painted side. Well, what is there to explain, so, it is clear that painting pipes is a big problem. I'll start with the background, who is not interested in scrolling down, there will be shown a cunning Finnish way.

Today I received a long-awaited parcel, pipe clamps, I did not dare to make this purchase for a very long time, because the price of such a product is cosmic, RUB 3000 for 1 pc. and this is also the budget version. By the way, who uses such clamps, please write which ones do you use?

Thanks to the tricks of the Finnish craftsmen, I was able to paint the pipes in a pack at once in a few minutes

A huge plus of these clamps is that there is no need to cut threads on the pipe. But you have to buy pipes, standard plumbing pipe 3/4 (outer diameter 26.8 mm)

So, how to paint them, so that quickly and beautifully) Prepared the place in advance, laid the remnants of the film.

Now we need two bars, mine is 50 * 100 mm.

I made the markings in 50 mm increments.

I tightened the screws 75 mm.

I fixed the beam to the table.

I put the pipes on self-tapping screws on one side, then on the other and secured the second beam.

We start priming with the help of an aerosol, as you already understood, we can safely scroll the pipes in different directions.

This paint dries quickly, so everything is simple, first one side, scroll, and then go to the other. It's so simple and fast, take note!

Full version in short video, be sure to watch:

Also, we are here: 👍👍👍 Youtube; 👉👉👉 In contact with; ✌✌✌ Tik Tok

  • Share:
Instagram story viewer