How to screw a bolt into a brick, concrete or wood on a thread, a proven trick from the USSR

How to screw a bolt into a brick, concrete or wood on a thread, a proven trick from the USSR

Without any bonnets and dowels, an unusual solution that few people know about. I decided to remind you of the old trick, who knows, maybe it will come in handy for you. Well, if not, then you can replenish your "baggage" of knowledge. After all, no one knows what situation we will find ourselves in tomorrow or in an hour.

How to screw a bolt into a brick, concrete or wood on a thread, a proven trick from the USSR

So, in order to tighten the bolt along the thread, we need to know its diameter.

How to screw a bolt into a brick, concrete or wood on a thread, a proven trick from the USSR

The bolt is 12 mm, which means that we need a 13 mm drill. There is no mistake here, we need 1 mm.

We made a hole in the bars, measure the depth and put a mark.

Now, very tightly wrap the bolt with foil, at least 6 layers. You need to press so that the thread is imprinted.

Now let's take epoxy glue, for example I use "CONTACT" glue. Grips quickly and holds very tightly.

Lubricate the hole in the bar with glue, and then apply it to the bolt with foil.

We fix and leave for 30-40 minutes.

After 30 minutes we try to remove the bolt. Of course, such a connection cannot be used for breaking, but for small loads it is very suitable.

How to screw a bolt into a brick, concrete or wood on a thread, a proven trick from the USSR

Now let's see what kind of thread is cut. (Scroll through the gallery)

Please rate the material 👍, subscribe to the channel. Also, we are here: 👍 Youtube; 👉 In contact with;Tik Tok 👌 Instagram

  • Share:
Instagram story viewer