flooring market is expanding day by day. If earlier PVC tiles can be bought only on order, but today the situation has changed - coating the desired color, texture and desired size can be freely purchased in specialized stores.
Many buyers have heard about the PVC tiles, but accurate information do not possess. PVC cover may have a multilayer or a single layer structure depending on the purpose. According to technology experts share the PVC coating on two types: heterogeneous and homogeneous. Tile latter type consists of polyvinyl chloride, has high durability. However, the choice of colors and textures of the flooring is fairly limited.
Heterogeneous tile consists of several layers. The first - a special adhesive agent, by which greatly simplified the process of installing the tiles. Second layer - PVC substrate. It gives the material additional rigidity.
PVC tile has several important advantages. Firstly, it does not cause any harm to human health presented type of flooring may be safely laid in premises, including the children's rooms.
Secondly, this material is not exposed to chemicals and UV rays. Third, PVC tile is well tolerated high humidity and prolonged exposure to water. Such a feature makes it possible to use this floor for finishing wet rooms. Notably the fire safety of PVC material. It does not support the combustion process and thus does not emit harmful toxic substances. In addition, high durability PVC coating allows to extend the scope. The floor material of this type can be used in areas with high traffic (entrance hall, kitchen, living room, and a variety of public places).
The main component of tiles - polyvinyl chloride foam of 2 mm thick. It is responsible for material properties such as elasticity, strength, durability, heat and sound insulating ability. This is followed by the decorative layer. PVC tile has broad capabilities in terms of design.
This flooring has a wide variety of colors and textures that mimic natural stone, parquet and floorboard, gravel, marble chips, and so on. D.
Finally, the last layer of tiles - protective, laminating. In most cases, manufacturers use such as polyurethane or polyester of a thickness of 0.2 to 0.5 mm. It is understood that the thickness of the protective layer depends on the wear resistance and durability of the coating as a whole. PVC tiles can be installed on a variety of grounds. Thus it is necessary to comply with generally accepted rules. Subbase must be firm, flat, dry and clean. Minor defects (cavities, cracks) in the cement-sand concrete or screed must be repaired repair mixture. Before you glue the tiles, the floor should be thoroughly vacuumed.
If the owners of the house decided to lay PVC tiles on a wooden floor, it must be processed using the scraping machines, and the joints are filled.
Laying the floor covering can be performed independently. Installation begins with the room center. The adhesive mass is applied by using a special spatula directly on the tiles, are then laid on its base, pressing hands for 6-8 seconds. Excess adhesive should be immediately carefully clean cloth.
It will be easier for those who bought the tiles with adhesive backing. For packing of such material is sufficient to remove the protective film. Stacked coating can not be washed and subjected to mechanical stress during two days.
Note that PVC tile needs no additional treatment after the installation. When cleaning use neutral detergents. If, after many years of operation on the surface appeared signs of wear, it can be treated with a special compound coating or wax mastic.
Subscribe to our channel, place Like, if you like the article and write comments! Share with your friends on social networks! Bye Bye!