Wiring in a wooden house

All the rules that must be done in a private wooden house wiring, spelled out in the "Rules for Electrical Installation."

Immediately it should be noted that the wiring in wooden houses is a kind of method, according to special rules, which were specially designed for the fact that the tree from which actually made a house is always a source of increased fire. By the way, precisely because of tainted or substandard wiring, according to statistics, most of the wooden houses in case of fire.

So, we proceed to the study of the order and the rules of wiring installation in the wooden house.

As in other houses, electric wooden house has its own electrical input. According to accepted standards, it must be made from wire which is not less than 15 square millimeters in cross section.

To enter the house electricity, use so-called STS, which has recently become particularly popular and widespread. But according to the norms, aluminum wire is not suitable for the input of electricity into the house, so we advise immediately make the transition from aluminum to copper.

Putting electricity into the house with walls made of wood is only possible with the use of copper wire, which will go through a metal tube, which is mounted directly to the wall of the house.

In fact, the requirements for the installation of interior wiring such as rigid. For example, if you want to do outdoor installation, it makes sense to make it out of the cable with non-combustible insulation. And if the insulation from the cable can catch fire, they should be placed in a special cable channel, corrugated tube or in electrical baseboards.

Of course, you can put the wire directly on the wall, but there is a limit - not less than 1 cm from the wall to the wire. This is usually used a kind of "clips, insulators." But this method is possible only in the non-residential premises - garages, sheds, as it spoils the look of the room. And that's why cable ducts are used in residential premises.

It should also be noted that the lighting wires that run between the false ceiling and the base, it can be placed in a corrugated pipe. But wire transfer between the walls must be made in metal pipes. There is an explanation - in metal pipes and cable wire hard peredavit, and still they do not sgryzut mice and rats.

In addition, such pipes should be used, if you select hidden wiring and make paneling lining. In this case all the pipes need to be grounded together. Grounding, who do not understand will help protect against electric shock, when the breakdown occurs in the electrical enclosure.

Subscribe to our channel, place Like, if you like the article and write comments! Share with your friends on social networks! Bye Bye!

  • Share: