Thank you all for dochityvaniya, put the Huskies and subscribe to our channel! We will be very grateful to you!
Built his home must be warm, otherwise there will be a comfort? This I know all men and try to build a house so that it is fully consistent with this requirement.
One of the most popular and fastest ways to build a house, it put him out of silicate blocks, but there is one thing but this material should be warm.
Someone outside obkladyvaet house facing bricks, someone warms and plasterers, but these methods are not entirely budgetary.
Having considered and weighed all the options, the man decided to warm the house and on top of mineral wool to sheathe siding.
Purchase the necessary material work began. The house, though not big, two floors, but the area of the walls in any case is very large, and buy only a portion, too, can not. So when planning similar works, consider the need for large-scale procurement of necessary materials.
The first thing a man hooked on the house fasteners for further crates.
Through these fasteners were dressed mats vitrified thickness of 50 millimeters. To be safe, they attached to the house with special clamps.
Next crate made of metal profiles.
On top of the insulation layer laid additional moisture protection, all of the technology and the resulting cake has top steel sheathing siding.
The choice was made to the side facing a light cream color.
Basement of the doge sewed special panels under the stone, but it was dark brown.
Gradually row by row house trimmed material. This process went quite fast, but due skill, work out much more cost, relative to other finishing materials.
As a result of this work, the appearance of the house has changed significantly, and if during the laying somewhere were slit, it is now certain problems with heat and drafts in the house will not be.
It should be noted that the work done very gently and carefully, all the corners and trim are installed so as not to leave the finishing touch on later.
Would you like to do in his apartment this repair? Or you would like to change?
Send us the story of your repair on mail[email protected]if you want to share your results