How to remove mildew from the grout on the tile

Mold and fungus usually appears in areas with high humidity. Over time, the constant dampness can cause bacterial growth, which is not only unhygienic and dangerous, but it is difficult ispravlyaemo. Get rid of the mold, which was formed because of any solution is doubly difficult. Using common household items, you can kill all the fungus and mold and prevent their re-occurrence between the tile seams.

What you need to prepare to remove mold and mildew from the grout:

- Rubber gloves.

- Work clothes.

- Bleach.

- Water.

- Bucket.

- Funnel.

- Cleaning brush.

- an old toothbrush.

- Paper towel.

- Empty the sprayer.

- Vinegar.

- A small tank.

- Lemon juice.

- Sponge.

- Marker.

Wear rubber gloves to protect your skin. Cleaning grout can lead to discoloration of clothes, so it's best to wear old clothes or specially designed for repairs.

Mix a cup of bleach with three glasses of warm water in a bucket. Remove the upper part of the gun and by using pour funnel bleaching mixture from the bucket into the nebulizer. Attach the top of the spray gun and make sure it is securely fastened. Use a marker to write on your sprayer "Whitening mixture".

With sprayer carefully apply the mixture on the problem areas, make sure that no liquid gets into your skin. Use a scrub brush to mechanically remove mold and fungus from the surface. For small areas, use a toothbrush. Wash seams cool, clean water. Repeat spraying and cleaning, if necessary. Place the sprayer in a safe place, it can still come in handy in the future. Keep it on the shelf, out of reach of children.

Fill a small container of vinegar. Put three or four sheets of paper towels and soak them in vinegar. Place paper towels on the grout areas that require extra care. Strongly pressed the towel to the surface until it is fully grapple with the solution. Leave the paper towels for about 8-9 hours. If you see that the paper starts to dry, apply more vinegar to the towel was wet again. Disconnect the paper towels from the grout and use a brush to clean out the rest of fungus or mold. Flush the area with cool, clean water.

You can also carry out an independent prevention, which will not allow mold and mildew to grow in your bathroom. After bathing, rub the area with a paper towel to remove excess water and moisture. Open the door to the bathroom to ensure good ventilation. Moisten sponge lemon juice and wipe the surface of the tile wait 15-30 minutes and rinse with cold water.

  • Share: