Self-made tool for transferring complex of angles consisting of 4 parts of

Hello! I want to show you how to make an interesting home-made, which will be useful to builders, finishers, as well as those who started the repair of the house. Made simple tool is very functional and useful, I hope you enjoy it, it often helps me.

So we need to manufacture interval metal shank 4, 20 cm long and 4 cm wide.

In the center of each blank to do a longitudinal slot, it is not difficult, you need only make a markup on the edges and drill holes using a grinder, cut the excess metal. Then it is necessary to round off the edges and smooth out the cut scenes from burrs.

We turned already finished parts, which can optionally be painted. It remains only to complete the assembly and you are ready to test. :)

Further needed screws with flat or rounded cap, washers and sheep. We recommend the lambs, as with their help, it will be easier to work with the tool. Further, all items must be twisted together, as in the photo below, one by one.

As you may have guessed, was very convenient device for transferring angles, with which you can transfer any corners, both internal and external. Due to the slots, the details of the protractor can be placed even in the most inaccessible places.

Very handy when installing laminate flooring, tiles, wood materials, etc. With sheep all parts securely fixed and risks mistaken disappear almost completely. There is not one significant disadvantage, the cap bolts are not in close contact with the workpiece and remains a small gap, but there is a practice, this problem is not so critical. On the whole, I pleased with the homebrew twig, and I hope you enjoyed! Thanks for attention.

  • Share:
Instagram story viewer